Playstation 2 repair

From: Fritz (theotherfritz_at_yahoo.com)
Date: 08/05/04


Date: Wed, 04 Aug 2004 21:01:39 -0400

Hi,

I'm trying to repair a PS2 console which is not reading either CDs or
DVD discs. So far, I've tried adjusting the laser height/angle and
I've also adjusted the pots on the laser eye itself. Sometimes the
disc will spin when inserted, sometimes not; but it won't read any
discs.

The unit will click when I insert discs as it tries to read them. I
am not familiar with class 1 lasers; I don't know whether they are
supposed to emit a visible beam or not, but if I close the tray with
no disc inside, I see nothing emitted from the laser.

Is it time to change the laser assembly in this unit?

Thanks,
Fritz



Relevant Pages

  • Re: CD-player erratic with CD-Rs
    ... I tried to adjust them with no avail. ... the signal between a normal CD and a CD-R? ... extending into playability issues with pressed discs, ... you probably need to consider replacing the laser. ...
    (sci.electronics.repair)
  • Re: archiving of digital photos
    ... nice thing about finer and finer data, the laser can always read the coarser data... ... discs the color of the light is important and a new device may not be ... CDs because the red DVD laser didn't work with all the IR dyes used in ...
    (rec.photo.digital)
  • Re: "Disc Cannot Be Played... Please Check The Disc"?
    ... Tried two discs. ... Put both discs in another player, ... Pulled the cover off, blew some air on the little laser thingie, then ... pretty sure that the laser is bad on its DVD side of things. ...
    (sci.electronics.repair)
  • Re: Blu Ray and HD DVD compomise over
    ... Recall the different thickness etc. of the discs, ... How will this be done with one laser unit? ... the bitter battle between the format camps now will assure that ... dual-layer writer with a simple firmware upgrade. ...
    (alt.video.dvd)
  • Re: CD RW wont write!
    ... CD-R/W media is, by nature, different than CD-R media. ... possibility that your laser is beginning to fail or the lens is dirty and ... > It works fine when writing to ordinary writeable discs ...
    (microsoft.public.windowsxp.basics)