Re: monitor problem

From: Jerry G. (jerryg50_at_hotmail.com)
Date: 08/08/04 

Date: Sat, 7 Aug 2004 22:25:34 -0400

Most likely you set the display card to out of range of your monitor!

Go in to the safe mode, and put the refresh rate back down. If you want to
use a higher refresh rate, then use a lower resolution. Consult your user
guide for the details about the settings allowed for your monitor.

It's probably time to invest in a new monitor, if the one you have is not
appropriate for what you want. 

-- 
Jerry G.
==========================
"Me" <heruti@lycos.com> wrote in message
news:2d4c3262.0408071737.277165b3@posting.google.com...
hi, I have an LG flatron 776fm monitor (not LCD).
after I changed the refresh rate from 60 to 75, it worked ok but
from the next reboot the monitor doesn't work:  its indicator light
blinks off and on between orange and green, and the screen is blank.
the computer sounds like its continuing the boot normally.
even after complete power off, and cable disconnect, its the same.
any thoughts?
thanks

Relevant Pages

  • RE: Multiple images on monitor
    ... Sounds like the puter has its refresh rate pumped higher than the monitor can ... Try turning it down by booting into safe mode and choosing something between ...
    (microsoft.public.windowsxp.general)
  • Re: Monitor sleeps @ startup
    ... That will start it at 640 x 480 with the lowest refresh rate, ... > refresh rate if you can't get the monitor to work so you ... > settings seem to not be available in SAFE mode. ... >>Does the monitor support the refresh rate that is ...
    (microsoft.public.windowsxp.video)
  • Re: problem after installing fedora core 6
    ... your monitor is necessary to get these specs). ... get you to a command prompt... ... I said you should issue 'nano /etc/X11/xorg.conf', nano is a text edit so ... what refresh rate should i try now...?? ...
    (comp.os.linux.setup)
  • Re: samsung syncmaster 700s
    ... Primoz wrote: ... >> There are two things that control the refresh rate like this. ... >> is the drivers for your video card, second is the drivers for your ... If you have installed drivers for your monitor, ...
    (microsoft.public.windowsxp.hardware)
  • Re: LG Monitor makes a high pitch noise
    ... you can actually change how it will sound. ... I used to have a Viewsonic monitor that did a resonance from time to time. ... changed the the refresh rate back to 75hz the sound returned again. ... What i was wondering is it possible that my graphics card is at fault? ...
    (sci.electronics.repair)
Quantcast