Re: TFT shut down after twenty minutes- any help app

From: Jerry G. (jerryg50_at_hotmail.com)
Date: 08/08/04 

Date: Sat, 7 Aug 2004 22:30:17 -0400

Determine if it is the back lamp or the display itself that is going to
black. This way you will know where to start looking. Check for any parts
that have become temperature sensitive, especially capacitors. 

-- 
Jerry G.
==========================
"Just Me!" <reply@news.here> wrote in message
news:4114F727.8020403@news.here...
Hi all,
I have an ADI TFT monitor that once running for about twenty minutes
shuts down, that is the picture will gradually fade then go completely.
Switch off for a bit then back on and it will work again for a while
till it does it again. Seems like something overheating but what would I
know. Is this a common fault and is it easy to put right
pic of monitor can be seen on www.ebid.co.uk where it is at £25 last I
looked. search for faulty should come up at top
regards
-- 
Free Mobile When You Spend £20
http://www.themobilematrix.com/index.asp?aff=u8120ukh
Affiliate Link - helps me, much appreciated and
thanks to all those that have already applied
It costs nothing to look and you could save a pretty penny if you play
your crads right. List just opened for LG U8120 be quick

Relevant Pages

  • Re: Dimming Fluorescent Ballast as Video Pixel
    ... that each lamp is like a pixel in a monochrome video display. ... accomplish this means that the "pixels" would have to respond to ... dimming control very quickly and dim to a low level. ...
    (sci.engr.lighting)
  • Re: LCD Problem - self repair
    ... display was not yet attached, then I mistakenly plugged the display in ... mention what happens when you plug it into an external monitor (you have ... something really white or in very bright light, ... It's the inverter that supplies the high voltage to the lamp ...
    (comp.sys.laptops)
  • Re: bulb question - 12v/20W vs. 6v/5w
    ... > suppy that has been made to serve a 6V/5W lamp. ... You will only end up with no light and a blown power ... >> Due to the construction of this display, a flashlight bulb will not work ... >> serious modification to the display. ...
    (sci.electronics.basics)
  • Re: Dell Inspiron 1300 and black corner of LCD
    ... The bottom right corner of the LCD gets extremely hot. ... This is a failure mode of the CCFL lamp that illuminates the display. ... As the display heats up it ceases to work very well as a display ...
    (comp.sys.laptops)
  • Re: LCD Problem - self repair
    ... display was not yet attached, then I mistakenly plugged the display in ... something really white or in very bright light, ... It's the inverter that supplies the high voltage to the lamp ... It means that, for some reason, no video signal is being received by the LCD. ...
    (comp.sys.laptops)