Re: Help identify TV Chassis

From: MarkC (markcharles_at_webtv.net)
Date: 08/26/04 

Date: Thu, 26 Aug 2004 01:42:50 -0500

It very well could be an NEC TV. Have you tried checking Sams Photofacts
website? In the meantime replace all of the electrolytic caps in the
VOUT circuit & resolder the VOUT chip & all of the other ringed, cold &
suspect solder connections that you can see on all circuit boards
including the one on the neck of the CRT.
I wear cheap 'dollar store' 3X reading glasses to help spot the bad
connections & but the lighted magnifying rings also work great.

Relevant Pages

  • Re: Help identify TV Chassis
    ... if there is bottom foldover replace electrolytic were one side is going off ... In the meantime replace all of the electrolytic caps in the ... VOUT circuit & resolder the VOUT chip & all of the other ringed, ... suspect solder connections that you can see on all circuit boards ...
    (sci.electronics.repair)
  • Re: Sanyo LA7841 IC
    ... A local independent TV repair shop would most likely sell you one. ... the VOUT chips will fail because of bad electrolytic caps in the VOUT ...
    (sci.electronics.repair)
Loading