Re: Help identify TV Chassis

From: Leonard Caillouet (no_at_no.com)
Date: 08/26/04 

Date: Thu, 26 Aug 2004 06:40:40 -0400

It was made by NEC. They stopped supporting consumer products years ago.
Your best bet would be to find a SAMs, likely listed under the JCP model.
It should not be necessary to get a schematic to fix this. Likely just bad
electrolytics in the vertical circuit, sometimes a bad tantalum cap would
cause this on some of the NEC sets.

Leonard

"Matthew Fries" <Nobody@home.com> wrote in message
news:6kuqi0hb1tqrj4cs6sht2ogu1ic77o27n2@4ax.com...
> I need a little bit of help from someone with more TV experience than
> me. (Fixing, not watching...) :)
>
>
> I have a 27" TV with a little bit of vertical foldover. It probably
> needs some replacement caps, since the manufacture date was 1987. It
> says JCPenney model # 685-2512, but all the circuit boards are etched
> with NEC on them. Some of the NEC part numbers are:
>
> PWC-2384
> PWC-2263
> PWC-2241
>
>
> It's a fine set, and it works! Once I know who REALLY made this set,
> I'd like to get some schematics for it.
>
> I appreciate your help (and any insight about this model).
>
>

Loading