Re: Still floundering with the Zenith
From: gothika (Vampyres_at_nettaxi.com)
Date: 09/07/04
- Next message: chris_at_nospam.com: "Re: Hard drive horror story X2"
- Previous message: Silver Surfer: "Still floundering with the Zenith"
- In reply to: Silver Surfer: "Still floundering with the Zenith"
- Next in thread: James Sweet: "Re: Still floundering with the Zenith"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 06 Sep 2004 23:14:32 -0500
On Tue, 07 Sep 2004 04:12:49 GMT, "Silver Surfer"
<h.mcguffinspamouflage@comcast.net> wrote:
>Should I be able to use an ordinary DMM to measure the continuity on the
>high voltage windings of the flyback on my Zenith SF2037W? From the low end
>of the winding to the high end are two diodes in series. There is a focus
>takeoff between the two. Can't read anything from the focus tap to the high
>end. Also cannot read anything from the low end to the high end. Read
>about 1100 ohms from the focus to the low end both polarities. Might just
>be parallel resistance in the circuitry if my meter is not capable of making
>the diodes conduct.
>
You really need a flyback and yoke tester.
- Next message: chris_at_nospam.com: "Re: Hard drive horror story X2"
- Previous message: Silver Surfer: "Still floundering with the Zenith"
- In reply to: Silver Surfer: "Still floundering with the Zenith"
- Next in thread: James Sweet: "Re: Still floundering with the Zenith"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
