Re: Epson Stylus Photo 825 Printer port

From: kofi Mpengya (fynnashba_at_yahoo.com)
Date: 10/30/04


Date: 30 Oct 2004 10:00:48 -0700

none <gothika@bellsouth.net> wrote in message news:<bfeun0p8o2ts5lp563ok343aol4c09j6vj@4ax.com>...
> On 26 Oct 2004 09:52:17 -0700, fynnashba@yahoo.com (kofi Mpengya)
> wrote:
>
> >Please good pals,
> > A good friend of mine has this Epson Stylus Photo 825 printer
> >and would like to connect it to a standart TV ( as monitor prreview
> >for printing photographs). The printer has two ports; a USB and
> >another ten pin port which looks like an S-Video socket but the manual
> >that came with the printer does not say anything about this ten pin
> >port. Now my problem is how do I connect the printer to standard TV
> >from this port? because all the cable available seems to fit only DVD
> >player (5 pins)May I know the name of this ten pin cable / socket?and
> >where can I obtain some. Can I match it to the Audio-Video input of a
> >standard TV or is there any way I can hook it up to a stand alone
> >computer monitor. I know it can be connected to a PC thru" the USB
> >port but using a stand-alone monitor or a standard TV will be more
> >convinient.
> > I have consulted the Epson on-line customer section on the net but
> >no reply.
> > Thanks in advance.
> > Dan - Gh. W/A
>
>
> There was a device made to do just that though I can't remember
> offhand who made it or what it was called.
> It was a hardware device that enabled you to view digital camera files
> as well as jpgs on your tv screen.

Thanks a lot for ya responds. I will also like to know if I can
preview the pictures on a computer b4 printing ie by just hooking it
up with a USB cable.
  Infact Epson is not trying to be of any help.



Relevant Pages

  • Re: Epson Stylus Photo 825 Printer port
    ... You will need the proper decoder equipment to ... another ten pin port which looks like an S-Video socket but the manual ... Now my problem is how do I connect the printer to standard TV ...
    (sci.electronics.repair)
  • Re: Epson Stylus Photo 825 Printer port
    ... | and would like to connect it to a standart TV (as monitor prreview ... | another ten pin port which looks like an S-Video socket but the manual ... Now my problem is how do I connect the printer to standard TV ...
    (sci.electronics.repair)
  • Re: [patch -mm 20/20 RFC] chardev: GPIO for SCx200 & PC-8736x: add sysfs-GPIO interf
    ... We need a standard rep for GPIO in sysfs, ... GPIO hardware design appears to have 2 top-level factors; ... change will also exhibit in the port attr too. ... if a pin is output only, it shouldnt have an _output_enabled attr. ...
    (Linux-Kernel)
  • Re: OT: DOS programming EPP
    ... There seems to be *no* specifications or equivalent circuits for the parallel port as implemented on the ASICs used in modern PCs. ... it is completely unknown as to the maximum safe sink current to a logic low pin or the maximum source current from a logic high pin. ... The EPP page assumes you did. ... CONTROL bit 5 defaults low. ...
    (sci.electronics.design)
  • Re: Any Plug and Play device shuts down PC
    ... Where 'X' represents each pin on the USB header. ... The only other thing that can be done is to adopt the way the rear port on ... if you used a wire ...
    (microsoft.public.windowsxp.hardware)