Re: Panasonic CT32XF37 out of focus

From: James Sweet (jamessweet_at_hotmail.com)
Date: 11/28/04 

Date: Sun, 28 Nov 2004 05:29:29 GMT

"Eugen T" <viperz@nomorespam.com> wrote in message
news:SGcqd.85975$Le1.1887731@news20.bellglobal.com...
> I thought about HV multiplier, that's why I need the schematics. I wasn't
> looking for a free service manual, just need a link on where to get one.
>

Usually this is integral to the flyback transformer. A service manual
probably won't be very useful for this fault, you'll need a HV probe (you
can make a makeshift one without too much trouble) but otherwise it
shouldn't be too hard to confirm the fault.

Relevant Pages

  • Re: VERILOG and VHDL
    ... schematics as compared to, say, 5000 lines of cryptic, uncommented ... For more sophisticated counters (up to 256 ... only to discover that "multiplier" is one of the ... One of our current designs includes eight saturating ...
    (sci.electronics.design)
  • Re: VERILOG and VHDL
    ... things that HDL designers do. ... schematics as compared to, say, 5000 lines of cryptic, uncommented ... For more sophisticated counters (up to 256 ... only to discover that "multiplier" is one of the ...
    (sci.electronics.design)
  • Relay problem
    ... John Fields wrote ... You've posted no schematics, nothing about what the problem is other ... Yup, as I said in my post, probably my fault. ... the fault, probably in my wiring. ...
    (sci.electronics.basics)
  • Re: Relay problem
    ... You've posted no schematics, nothing about what the problem is other ... Professional Circuit Designer ... Yup, as I said in my post, probably my fault. ... the fault, probably in my wiring. ...
    (sci.electronics.basics)
  • Re: IDing a Fender Bassman to reverse mods
    ... I don't think it's the amps fault. ... >> my copy of the Tube Amp Book, ... I've rounded up four schematics that ... >> I guess my real question is, is there a specific circuit Fender used ...
    (rec.audio.tubes)