Re: nad AV-716

From: oivindd (oivindd_at_[PROTECTED)
Date: 11/30/04 

Date: Mon, 29 Nov 2004 19:38:40 -0500

Hi!

Thank you for providing the great tip on the AV-716. The display on my
unit died in February 2004, but the amp itself worked fine until today
(November 2004). When switching the unit on, there was only one click (it
use to be two) and no sound or display.

R921 and R922 on my unit was busted, and both the display and the amp
seems to work fine after replacing them.

I want to replace all the resistors you mentioned. However, I seem to have
a different value for R924. Mine is 8.2 ohms (gray/red/gold) while yours
is 33 ohms. I have removed it from the PCB and checked with a multimeter
(~8.5 ohms) which seems to match the color coding.

Do you know if it is possible that I have a different PCB version? Mine
has the code "NCAR-4692" on it. The amp was bought in Norway sometime in
the 90's (I bought the amp second hand in ~1995 I believe). Can you
confirm that your R924 (sitting next to R923) is 33 ohms?

I would like to apologize in advance for any misconceptions or mistakes on
my part. :-)

Thanks in advance,

Oivind H. Danielsen

Relevant Pages

  • Re: Mercury Magnetics --- Worth the price of admission?
    ... project is going to be an 18W TMB clone with a custom tone stack. ... As I am making out the BOM for this amp I am torn between Heyboer ... what's marketing fluff than the rest of us. ... of (if that display breaks, you have no instruments and stand a much ...
    (alt.guitar.amps)
  • Re: Mercury Magnetics --- Worth the price of admission?
    ... project is going to be an 18W TMB clone with a custom tone stack. ... to give this amp away as a gift, so I want it to sound as good as ... what's marketing fluff than the rest of us. ... Most of the times the $3,000 display will explode into a shower of glass, aluminum, and silicon and you might be lucky and get the same model on your next order. ...
    (alt.guitar.amps)
  • Re: Bose AWR1-1W repair
    ... I called the Bose service center and found out they no longer service ... As the failure affected both channels immediately and as your display is ... I'd look at your power supply voltages first. ... Does the amp use transistors or STK-type amp modules? ...
    (sci.electronics.repair)
  • Re: & and &
    ... You can't if the document is served as text/html. ... If you want a browser to display & literally in a document served as ... side data processing needs to convert character references (not just ...
    (comp.infosystems.www.authoring.html)
  • Re: page display errors
    ... file named may be causing the problem ... as & is not a valid resource locator in a URL. ... browsers can't find this file and just screw things up. ... to SOMETIMES display incorrectly in IE 6.0, ...
    (microsoft.public.frontpage.client)