Re: Sony G420 retrace lines, adjustment??

From: J. Doe (umama_at_beenlaidon.com)
Date: 12/09/04 

Date: Thu, 9 Dec 2004 07:32:02 -0600

George Jetson wrote:
> "J. Doe" <umama@beenlaidon.com> wrote in message
> news:10rfcokju9ca6f5@corp.supernews.com...
>> dkuhajda wrote:
>>> Here is how YOU adjust the G2 on that Sony monitor.
>>> 1. You become Sony authorized warranty servicer for the monitor.
>>> 2. You spend approximately $4,000 on a service manual subscription.
>>> 3. You buy the Sony Digital Alignment software and the specific
>>> interface for that monitor, around $250 total here.
>>>
>>
>> That's what I expected to hear....... argghhhhhhhhhh
> After searching for awhile I found this post about a very similar
> problem, after I tried this mod on a Dell P1110 the problem was
> mostly solved. This is a hack but may give you insight on improving
> your problem. I used a 14M from spare parts and tacked it parallel
> with R459.
>

If things weren't sealed up like a sardine can AND I had a schematic there'd
be a chance for some jungle engineering, but so far things aren't bad enough
to go to all that trouble. Of course the chance of obtaining a schematic is:
#1 slim to none, and #2 would cost 25% the price of a new monitor.
Maybe later.. Thanks. d:->))

Quantcast