Re: Repost, of a problem!!

From: Art (plotsligt_at_comcast.net)
Date: 01/06/05 

Date: Thu, 6 Jan 2005 08:11:57 -0500

Time to actually BUY the Service Literature from Toshiba??? May give yu all
the information you really need????
"Martin Whybrow" <aholeintheground@ntlworld.com> wrote in message
news:o22Dd.3018$Jm4.150@newsfe3-gui.ntli.net...
>
> "BigTom" <me@my.net> wrote in message news:41DC922F.3080500@my.net...
>> is this any help?
>>
>> Toshiba TV Various Models
>> Service mode procedure for most Toshiba TVs
>> Press sound mute (on remote)- Tv displays sound mute OSD, Then hold down
>> sound mute and press the menu button on the control panel
>> This should display the service mode data with an 'S' in the corner of
>> the screen. Gives basic geometry and display data.
>>
>> Press the -- button on the remote - enters frame collapse mode - to set
>> screen voltage
>>
>> When in service mode:-
>> Hold down CALL (on the remote) and press the menu button, Set then
>> enters design mode
>> All sub data can then be adjusted.
>>
>> Projection models
>> From service mode - pressing the yellow button on the remote gives the
>> convergence adjustment mode
>> Up/2 Down/8 Left/4 Right/6
>> Press 5 to toggle adjustment / move - on / off
>> Press 3 to change colour to be adjusted
>> It is recommended that the green convergence grid should not be adjusted
>> Pressing the red green or blue buttons will toggle the corresponding
>> convergence grid
>>
>> From service mode - hold down the F on the remote and press 7 - enters
>> convergence menu - auto convergence setup for different aspect ratios
>>
>>
>>
>> Rono wrote:
>> > Some of you guys misunderstand what I want!
>> >
>> > How do I get into the EEPROM, & Micro, in
>> > order to change the parameters! Example: The
>> > vertical height is too high!
>> >
>> >
>> > Got a Toshiba M # 24AF43, Chassis # M3M627.
>> > Plug it in, barely visible out of horizontal sync video,
>> > (basically, no video), no sound, change channels, &
>> > you can see that the channel has changed! Looks like
>> > a "Prima" T.V. problem, almost exactly the same! All
>> > measures good on the board...looks like EEPROM/
>> > Micro problem! Called Toshiba, & they were just
>> > closing for the year!!
>> >
>> > How do I get into, & change
>> > the EEPROM, & micro values! Thanks, Rono
>> >
>> >
>> >
>>
> I have a Toshiba 2577DB with a geometry problem; I can enter service mode
> as
> 'Big Tom' described, but I don't know what the OSD abbreviations mean. I
> tried downloading a manual but I cannot open the 'rar' archive that it's
> stored in. Can anyone tell me what the OSD messages in service mode mean?
> Martin
> --
> martin<dot here>whybrow<at here>ntlworld<dot here>com
>
>