Re: Loewe Xelos TV common problem?- tips/someone to repair maybe

From: Gary Fozzard (gary_at_fozzylogic.com)
Date: 01/08/05


Date: Sat, 8 Jan 2005 15:41:53 +0000 (UTC)

ouch thats sounds like its not worth the bother then. I thought
the tubes just faded a load and lost contrast. when this works
its picture is superb... just this intermittent problem.

Ole Geisler wrote:
> On Sat, 8 Jan 2005 11:04:00 +0000 (UTC), Gary Fozzard
> <gary@fozzylogic.com> wrote:
>
>
>>Can anyone help me to give a rough idea of what may be wrong so I can
>>see if its worthwhile trying to get a repair.
>
>
> I dont need EURAS for this one. The tube is bad.
>
>



Relevant Pages

  • Re: (Amp content) - So, Ive had the load mismatched all along . . . EL84 munchage.
    ... It's eaten quite a few of the power tubes in these past 9 months, ... Idle current 35 mA per tube. ... Now I'm wondering about my load impedance. ... dissipation actually decreases from idle. ...
    (alt.guitar.amps)
  • Re: Simple SE output stage
    ... I am fully experienced in solid state, but not tubes. ... Output impedance 350 ohms ... the 350 ohm load, via a series resistance if necessary. ... giving the required power but needing a 6SN7 driver though. ...
    (rec.audio.tubes)
  • Re: (Amp content) - So, Ive had the load mismatched all along . . . EL84 munchage.
    ... It's eaten quite a few of the power tubes in these past 9 months, ... Now I'm wondering about my load impedance. ... dissipation actually decreases from idle. ... IME EL84s are a little more prone to 'HF Oscillation. ...
    (alt.guitar.amps)
  • Re: 6CH6 voltage rating
    ... The higher the load ohms, the greater amount of class A, less AB power ... Tubes tend to last longer. ... Especially true of Marshalls and all similar EL34 based amps. ...
    (rec.audio.tubes)
  • Re: Soldano..pull 2 tubes for half power...
    ... >> The load is supposed to match the winding on the output side of the ... > With all four tubes, ... >> the impedance on the other side of the tranny? ... > now your 4 ohm tap on your amp becomes your 8 ohm tap. ...
    (alt.guitar.amps)