Re: Sony DVP-S530D C:13:00 error

hopdrop_at_hotmail.com
Date: 02/27/05 

Date: 27 Feb 2005 11:41:51 -0800

Mark D. Zacharias wrote:
> Usually a bad pickup, which is sold as a complete assembly, the
> A-6062-397-A.
> This model is not of the same affected series as the ones you're
thinking
> of, which include the DVP-S360, and DVP-S560D, though the pickup is
the same
> type.
>
> There were some resistor values in the 360's etc which tended to
result in
> the pickups being overdriven and the coils shorting out. This does
not apply
> to your DVP-S530D.
>
> Replacing the motor only is not an option for most people, even if
you can
> get one. This mechanism is not designed for service, though a
technician can
> sometimes sway a spindle motor from a scrapper. Problem is resetting
the
> disc platter height, which is pretty critical.
>
> Weighing against repair in my opinion is that the 530D will not do
CD-R's,
> except for "special" silver CD-R's.
>
> Also new models will do newer formats and often include JPG picture
> viewers.
>
> Mark Z.
>

Thanks for your reply. So, most likely the optical reader needs to be
replaced and the proper part is found here:

http://www.partstore.com/ProductDetail.aspx?ProductSKU=1878809&ProductType=PART
http://mcm.newark.com/NewarkWebCommerce/mcm/en_US/endecaSearch/partDetail.jsp?SKU=32-18065&N=4

And these that are $27 will not work:
http://www.electronix.com/catalog/product_info.php/cPath/1_23/products_id/11146
http://www.electronix.com/catalog/product_info.php/cPath/1_23/products_id/11145

Thanks,
Brian

Relevant Pages

  • RCA DRS700N DVD player not reading discs
    ... I'm working on this RCA DRS700N DVD player from 2002 which won't read ... Even when it does play, the 'eye' pattern is fuzzy, unstable and it ... It keeps trying to move the pickup out beyond the end ... checked the spindle motor and ruled out any ...
    (sci.electronics.repair)
  • Re: Computer Generated Noise
    ... Mark D. Zacharias wrote: ... I had this problem largely resolved by replacing the power supply in the cheapo computer box with a higher quality power supply. ... Another tip,If you can fit one,use one of the IEC sockets with the built-in filtering can on the back on everything in your house that uses an IEC socket,all the SMPS's in everything now days are nasty. ... Ferrite every cable on your PC,at both ends of the cables. ...
    (sci.electronics.repair)
  • Re: Rickenbacker Bass
    ... strings hit against the rear pickup poles (if that is the proper ... pickup, the outside poles are about the same height as the ... Mark Arnquist ...
    (alt.guitar.bass)
  • Re: Rickenbacker Bass
    ... strings hit against the rear pickup poles (if that is the proper ... pickup, the outside poles are about the same height as the ... lower the bridge, I figured I would see about the pickups before I ... Mark does still work on guitars because he works on mine and my ...
    (alt.guitar.bass)
  • Re: Sony DvD repair
    ... Mark D. Zacharias wrote: ... > There will be a "solder short" on the new one which must be cleared before ... the DVD player worked for a couple of days after ... I put the old pickup back in, and then it stopped working again. ...
    (sci.electronics.repair)