Re: 6 Volt Wind Generator Upgrade

From: NSM (nowrite_at_to.me)
Date: 03/14/05 

Date: Mon, 14 Mar 2005 20:22:29 GMT

"cnctut" <cnctutwiler@wmconnect.com> wrote in message
news:1110809380.159595.31250@f14g2000cwb.googlegroups.com...

> Was hoping to find something to attach to current 6 volt generator to
> help with 12v loads.
> Something simple and cheap. I have a small 12V inverter but its cut in
> voltage is 10v. If I could get it to cut in at 3 or 4 volts I could
> work with that also.

It's sure do-able. What you will find is that simple designs aren't too
efficient. I'd look for a design using Mosfets and a ferrite transformer.
I'm sure Google is your friend.

N

Relevant Pages

  • Re: NVA Amps
    ... always designed to be able to handle complex loads - think of the Electrostatics for a start - and are difficult to break. ... I have a great deal of respect for QUAD's engineering and designs, and the QUAD 405 is still a very competent amplifier, with excellent longevity, but it was never designed for extreme loads. ... You may recall that QUAD released a modification to parallel the two outputs, turning the 405 into a mono amplifier capable of driving low impedance loads. ...
    (uk.rec.audio)
  • Re: HPcalc.org Commerce Site Update
    ... know functions perfectly as I've tested them on a wide variety of ... cheap surveying equipment. ... designs I've tried have the annoying tendency to drop the first ...
    (comp.sys.hp48)
  • Re: Pool table or teeter-totter?
    ... My impression is that there foreign companies continually putting out cheap ... copies of popular designs. ... stores and online companies that are not dealers for any of the big names ... the Metro or the Manhattan that are hard designs to knock off. ...
    (rec.sport.billiard)
  • Re: frequency meter
    ... If you aren't afraid of picking up a soldering iron, it is pretty cheap and ... (Well, OK, if your junk box isn't very good, and you don't have other ... Take a look at OM3CPH's designs for a starting place. ... high frequency capability - a few MHz is good enough but I need good ...
    (rec.radio.amateur.homebrew)
  • Re: solid state 6m amplifier/IRF 510!
    ... is it's dirt cheap. ... A class E amp can be "plate modulated" in the usual ... For decent RF designs that withstand impossible swrs a good RF rated ... They work well for 2m SSB service with decent IMD. ...
    (rec.radio.amateur.homebrew)