Re: SDRAM arrrgh :(
From: Salvatore (healer_at_NoSpamaccesshub.net)
Date: 03/15/05
- Next message: James Sweet: "Re: Spa pump dissasembly"
- Previous message: Victor Roberts: "Re: Rewiring a ballast. Help needed."
- In reply to: Pera Mitic: "SDRAM arrrgh :("
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 14 Mar 2005 22:16:15 -0500
On Fri, 11 Mar 2005 11:00:03 +0100, Pera Mitic <orangeami@mail.ru> wrote:
>I have bought some new type SDRAM (256Mb, 133, NCP) although seller
>told me it wouldn't work on pre-2001 motherboards (at that time I
>didn't know mobo was made in 2000). so it doesn't work. windows
>crashes on boot with blue screen and BIOS doesn't show text (!), only
>colored boxes :((((
>
>I was told by salesman it would work at least as 128Mb. Since it
>doesn't, does it mean SDRAM is broken? I got some guarantee, and
>hopefully they will give me new one but it will be of the same type :(
>If that new module works as 128Mb, is it safe to use it? (computer is
>online 24/7)
>
>BTW, I have only two slots and here are some details of my system,
>just in case it helps you to help me :)
>
>CPU-Z Report
>------------------------------------
>CPU-Z version 1.26.
>
>CPU(s)
>Number of CPUs 1
>Name Intel Pentium III EB
>Code Name Coppermine
>Specification Intel Pentium III EB 666MHz
>Family / Model / Stepping 6 8 3
>Extended Family / Model 0 0
>Brand ID 2
>Package Socket 370 FC-PGA
>Core Stepping cB0
>Technology 0.18 µ
>Supported Instructions Sets MMX, SSE
>CPU Clock Speed 664.5 MHz
>Clock multiplier x 5.0
>Front Side Bus Frequency 132.9 MHz
>Bus Speed 132.9 MHz
>L1 Data Cache 16 KBytes, 4-way set associative, 32 Bytes line size
>L1 Instruction Cache 16 KBytes, 4-way set associative, 32 Bytes line
>size
>L2 Cache 256 KBytes, 8-way set associative, 32 Bytes line size
>L2 Latency 0
>L2 Speed 664.5 MHz (Full)
>L2 Location On Chip
>L2 ECC Check enabled
>L2 Data Prefetch Logic no
>L2 Bus Width 256 bits
>
>Mainboard and chipset
>Motherboard manufacturer FUJITSU SIEMENS
>Motherboard model D1170, S26361-D1170
>BIOS vendor FUJITSU SIEMENS // Phoenix Technologies Ltd.
>BIOS revision 4.06 Rev. 1.10.1170
>BIOS release date 10/27/2000
>Chipset Intel i810E rev. A3
>Southbridge Intel 82801AA (ICH) rev. 2
>
>Memory
>DRAM Type SDRAM
>DRAM Size 128 MBytes
>CAS# Latency 2.0 clocks
>RAS# to CAS# 2 clocks
>RAS# Precharge 2 clocks
>Cycle Time (TRAS) 5 clocks
>Bank Cycle Time (TRC) 7 clocks
># of memory modules 1
>Module 0 Hyundai Electronics SDRAM PC100 - 128 MBytes
>
>Software
>Windows version Microsoft Windows XP Professional Service Pack 1
>(Build 2600)
>DirectX version 8.1b
You need LOW DENSITY PC133 memory. PC100 will not work as your FSB is
133MHZ and what you bought will only be seen as half of its capacity. Do
not know what would occur if you use it as it. Might be OK?? no
experience on that one.
I may have what you need if you are in the US.
- Next message: James Sweet: "Re: Spa pump dissasembly"
- Previous message: Victor Roberts: "Re: Rewiring a ballast. Help needed."
- In reply to: Pera Mitic: "SDRAM arrrgh :("
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
