Re: JVC BR-S611U - load ok, tape not retracted on eject, no play/ff/rw


David Brodbeck wrote:
> The patient is a JVC BR-S611U. This is an old professional SVHS edit

> VCR. It loads okay, and positions the tape in the "half loaded"
> position. No response to play, fast forward, or rewind. On eject,
the
> tape is not retracted back into the cassette. Using an empty
cassette
> shell, I can see that there's never any movement of the supply or
> take-up reels.

Check/ clean /replace Mode switch. almost sure to be that.
IC protector on drum motor ic has caused me the occasional problem in
jvcs.

-Ben

.

Relevant Pages

  • Re: Cassette loading problem - "Error - No data found"
    ... 99 4A I got my brother for Christmas, but when I go to load the game ... in, get to the main menu screen, select cassette, then it says to ... other side of the tape but continue to get the same error. ... you should not hear them from the player - otherwise check ...
    (comp.sys.ti)
  • Re: Cassette loading problem - "Error - No data found"
    ... 99 4A I got my brother for Christmas, but when I go to load the game ... in, get to the main menu screen, select cassette, then it says to ... other side of the tape but continue to get the same error. ... you should not hear them from the player - otherwise check ...
    (comp.sys.ti)
  • Re: curiosity: Quickdrives for C64
    ... the largest tape should be read through in 64 seconds. ... About 1982/3 I got hold of three or four Philips cassette data drives. ... Transam Tuscan S100 Bus computer to fully control all features of their ... the middle of the tape (or as close to the middle if the format rejected ...
    (comp.sys.sinclair)
  • Re: Apple II cassettes by Brutal Deluxe Software
    ... audio going into your computer from the tape deck, ... short of finding another copy of the same cassette in better shape. ... suggestion, if you have the type of Apple system the software requires, have ...
    (comp.sys.apple2)
  • Re: Cassette loading problem - "Error - No data found"
    ... in, get to the main menu screen, select cassette, then it says to ... other side of the tape but continue to get the same error. ... should set the knobs (both volume and tone) to the markings so that they are ... you should not hear them from the player - otherwise check ...
    (comp.sys.ti)