Re: 48 volt uninterruptible power supply

Adrian Brentnall <adrian-the papers and the trash@xxxxxxxxxxxxxxxx> wrote:
>The problem I'm experiencing is that, when connected to the mains, the
>unit happily charges the dryfit battery, but does not 'invert' (i.e.
>produce the 48v) when the mains is disconnected. I'm guessing that the
>control circuitry is sensing the mains dropping out (as the 'mains'
>led goes out) - but the unit doesn't seem to want to go into 'invert'
>mode.

Have you tried putting a small load (5 watts, maybe) on the output?
Perhaps it doesn't switch on if it doesn't detect any connected
equipment. If that doesn't do it, try a little more load, but at a
guess, it should work with half its rated load (18 watts or so).

If it was meant to be used with equipment that was also supplied from
a 48 V battery bank, it might want to see some voltage on its output
before it turns on. The idea being that when everything is working,
the external battery bank is being charged by another charger and the
system voltage is maybe 54 V. When mains power fails, the other charger
quits, and the external battery drops to maybe 50 V. As it discharges,
maybe to 46 V, this UPS detects it and kicks on to supply power. If
the voltage gets too low, it might shut off automatically.

>There's a multi-way connector strip on the outside of the case - which
>has connections for 48v, plus a number of status connections - but I
>have no documentation on these.

Are there any labels on the strip? If so, what are they?

Since this sounds like phone gear, you might also ask over in
comp.dcom.telecom.tech .

Matt Roberds

.

Relevant Pages

  • Re: 48 volt uninterruptible power supply
    ... >>unit happily charges the dryfit battery, ... >>produce the 48v) when the mains is disconnected. ... When mains power fails, the other charger ... >>has connections for 48v, plus a number of status connections - but I ...
    (sci.electronics.repair)
  • 48 volt uninterruptible power supply
    ... This unit has a 2-part black metal case enclosing a battery charger / ... The problem I'm experiencing is that, when connected to the mains, the ... unit happily charges the dryfit battery, but does not 'invert' (i.e. ... has connections for 48v, plus a number of status connections - but I ...
    (sci.electronics.repair)
  • Re: 12V electrics problem
    ... According to the caravan's meter, the battery has no charge, so maybe the battery has conked out, but I would have thought the 12V electrics would function while the battery is still connected and being charged. ... Wouldn't the charger power the 12V electrics as well as charging the battery? ... We keep the caravan at home, and the charger is left on all the time. ... Do the mains lights in the van - if you have any - work when the mains is on, or failing that is there any supply from a 13A socket, again if you have any? ...
    (uk.rec.caravanning)
  • Re: 12V electrics problem
    ... The 12V side of my caravan have stopped working. ... According to the caravan's meter, the battery has no charge, so ... and the charger is left on all the time. ... Do the mains lights in the ...
    (uk.rec.caravanning)
  • Re: Easy Question: Charging Car Battery Removed From Vehicle?
    ... maintain) electronic battery charger that's about 10 years old. ... At 20ma I can see a spark in the dark. ... I have made connections to batteries also without blowing anything up. ...
    (rec.autos.tech)