Re: Sanyo STK 392 040 Convergence AMP burns out in HDTV application

From: "Leonard Caillouet" <no@xxxxxx>
Date: Fri, 22 Apr 2005 06:03:42 -0400

Cheap chinese replacements? Where did you get them?

Is there significant dc offset on the inputs? Used too much heat sink
grease?

Leonard

"LB" <lb> wrote in message news:116gob0l0s3h67@xxxxxxxxxxxxxxxxxxxxx
> Any reason for this IC to burn out? Replaced carefully, enough heat sink
> grease. Ran one week.
>
> L
>
>

.

Follow-Ups:
- Re: Sanyo STK 392 040 Convergence AMP burns out in HDTV application
  - From: Art

References:
- Sanyo STK 392 040 Convergence AMP burns out in HDTV application
  - From: LB

Prev by Date: Re: DVD recorders
Next by Date: Re: Camcorder audio problem - 8mm in hi8 camcorder
Previous by thread: Re: Sanyo STK 392 040 Convergence AMP burns out in HDTV application
Next by thread: Re: Sanyo STK 392 040 Convergence AMP burns out in HDTV application
Index(es):
- Date
- Thread

Relevant Pages

Re: Sanyo STK 392 040 Convergence AMP burns out in HDTV application
... Agreed, order exact manufacturer replacment, check the associated low value ... Replaced carefully, enough heat sink ... >> grease. ...
(sci.electronics.repair)
Re: Motherboard replacement
... On a tower I have used white lithum grease ... I'm not sure what the "silver stuff" you refer to is, ... heat sink compound completely, and have gone instead to special thermal- ... If you can't find the thermal pads, you may be able to get away ...
(alt.sys.pc-clone.dell)
heat sink instructions for thermal grease ... Im confused
... "If grease is already pre-applied on the heat sink, ... additional grease on CPU surface. ... I've seen heat sinks with "thermal pads" on them, ...
(alt.comp.hardware.pc-homebuilt)
Re: Sanyo STK 392 040 Convergence AMP burns out in HDTV application
... > Any reason for this IC to burn out? ... Replaced carefully, enough heat sink ... > grease. ... Bad caps at it's output. ...
(sci.electronics.repair)
Re: my sound problem? Bad heat sink?
... Heat sink compound. ... then things get crappier still). ... and they don't seem loose. ... what do I grease these up with and why? ...
(rec.games.pinball)