Re: Phoneline to Soundcard - NEED HELP
- From: "Travis Jordan" <no.one@xxxxxx>
- Date: Thu, 12 May 2005 21:21:11 GMT
alexwright321@xxxxxxxxxxxxx wrote:
> Anyone know how-to make a cable that would plug into my telephone jack
> and then into my computer soundcard?
>
> I bought one from EBay and when I plug the cable into my phone line
> and then into the soundcard my line
> goes dead.
The one you bought probably works fine with an ac-isolated microcassette
recorder with a high impedance microphone input.
> One guy mentioned he uses an isolator circuit of some sort to not
> short out the line in his device.
Yep, that would be a good idea.
Personally, I'd build such a device with a couple of .1 mfd coupling
capacitors and a 600 ohm to 600 ohm isolation transformer to provide a
balanced input. Total parts cost about $5.00. However, if you need to
buy one then....
http://www.omnicronelectronics.com/analog/LIC-100.htm
.
- Follow-Ups:
- Re: Phoneline to Soundcard - NEED HELP
- From: DaveM
- Re: Phoneline to Soundcard - NEED HELP
- Prev by Date: Re: Repair Krups Carafe Handle
- Next by Date: Re: Noob question. How do you check a resistor?
- Previous by thread: Sony NW-HD1 Service Manual
- Next by thread: Re: Phoneline to Soundcard - NEED HELP
- Index(es):
Relevant Pages
|