Re: Toshiba TheaterView Projection TV with display problem
- From: ZZactly@xxxxxxx
- Date: 12 May 2005 21:32:05 -0700
You have a VERY PHYSICALLY SECURE faulty connection, or something
really wierd. By really secure I mean it is probably inside a coupling
cap, If that set uses one for the yoke V windings the first thing I
would do is at least jump it out with like a 470 or better. Make sure
you got a 200V unit in your hand if you like your hand.
If most of the distortion is at the top you might have a bad boost cap,
if not replaced will overheat the verttical output and cause it's
failure.
One other possibility is the ramp cap itself.
If you're a tech you will understand: check all the caps in the C3XX
series, especially the ones near the jungle IC. This is of course after
the soldering is over with. You might also have low B++, but to tell I
would need a very well articulated description conforming to a set of
questions.
If not a tech, perhaps you see why we charge money ?
If you're not a tech stay outta there.
JURB
.
- References:
- Prev by Date: Re: Replacements for 2SA1302/2SC3281
- Next by Date: Re: Sony GDM-FW900
- Previous by thread: Re: Toshiba TheaterView Projection TV with display problem
- Next by thread: Replacements for 2SA1302/2SC3281
- Index(es):
Relevant Pages
|
