Re: Help needed: Is a T5A H250V fuse the same as a F5L 250V?

Thanks for your answer,

Some moron set the switch on the back of my computer from 230 to 115V
the other day, so I'm guessing my monitor got caught in the blast
somehow. I'm about to replace the power supply, after that I'm going to
give the monitor a try - once.
Thanks again,

Kax

.

Relevant Pages

  • Re: Electronic multi-switches
    ... An electronic switch of some sort works as ... when an Atari mono monitor is present ... whenever an Atari monitor is used it will work just ...
    (sci.electronics.basics)
  • Re: LCD Monitor Problem - Turns on and off
    ... I had registered my monitor and asked the representative when I called ... he came to switch the monitor on, ... 82k startup resistors were pretty distressed and high. ... there was a single 220uF cap on the primary side. ...
    (sci.electronics.repair)
  • Re: Starting
    ... My system is a HP with a CRT monitor. ... Every morning when I first switch my system on everything starts up and I ... again and my system won't work until I restart it the second time. ... The monitor has its own power cord and goes into standby, ...
    (microsoft.public.windowsxp.basics)
  • Re: resolution changes and KVM switch use
    ... I've set up a KVM switch between a PC running XP and one with Vista ... positioning) when separately connected to the monitor. ... Is this likely to be a KVM switch issue, a conflict between the XP and Vista ... If the user enters the control panel for the video card, the driver may ...
    (microsoft.public.windowsxp.hardware)
  • Re: Vaxstation 3100 and graphics card
    ... > pin vax monitor plug to the 15 pin d-sub VGA plug. ... > happen even if the adaptor is not connected. ... and the manual does not indicate any switch or jumper ... the two switches on the graphics card). ...
    (comp.os.vms)