Re: DX-398 shortwave receiver problem: dead headphone channel
- From: "jakdedert" <jdedert@xxxxxxxxxxxxx>
- Date: Fri, 20 May 2005 17:10:41 -0500
Karl wrote:
> Well actually, I thought of that right off and tried two different
> phones. I also have removed and checked the jack, and it is ok, and I
> can't find anything visually awry with traces or components. I guess
> I'll have to scare up a schematic somewhere and trace it out.
>
When you get that schematic, check to see if the radio has a *stereo*
headphone jack (you can do this by inspection as well). If not, the only
way you can get both sides to work is by using a 2.5mm mono to stereo
adaptor.
jak
> Thanks for the replies.
>
> "Michael Black" <et472@xxxxxxxxxxxxxxxxxxx> wrote in message
> news:d6laak$km$1@xxxxxxxxxxxxxxxxx
.
- Follow-Ups:
- Re: DX-398 shortwave receiver problem: dead headphone channel
- From: Andrew Rossmann
- Re: DX-398 shortwave receiver problem: dead headphone channel
- References:
- Prev by Date: Re: NAD CD problem.
- Next by Date: Re: Motion Sensor always on?
- Previous by thread: Re: DX-398 shortwave receiver problem: dead headphone channel
- Next by thread: Re: DX-398 shortwave receiver problem: dead headphone channel
- Index(es):
Relevant Pages
|
