Re: CTC177 trouble!!

Ok Maybe a break on the board or you have missed a bad component.

kip
"Rono" <rono@xxxxxxxxxxxxx> wrote in message
news:HIydnWWmtqVvzAzfRVn-sQ@xxxxxxxxxxxxx
> You guys are missing the info!! These units will not run
> with high standby B+. Scopes & EEPROM changes won't
> fix it. I tried everything I could think of. Just read again. Rono.
>
> RCA 25" M # 25GT536, chassis # CTC177AG. Unit was dead,
> replaced STK-730-010 (shorted), R104 1.5 meg ohm (gone high),
> C4105 10UF @ 250 Volt (gone leaky), checked/replaced CR4108
> (130 volt line), changed C4402 (warped), 12 volts, & 5 volts standby
> is fine, 5 volts to EEPROM, & tact switches, but 130 volt line is +146
> volts dc. B+ to LA7610 main jungle IC +7 volts. B+ to horizontal output,
> & drive is + 146 volts, & unit won't start. What did I miss? Rono.
>
>
>


.

Relevant Pages

  • Re: Compact connected Hausdorff
    ... > of U are also open in X (a relatively open subset of an open set is ... > What am I missing? ... Prev by Date: ...
    (sci.math)
  • Re: RCA Projo!
    ... > Rono, what you need to include in your inquiry is the chassis number as ... > kip Wrote: ...
    (sci.electronics.repair)
  • Form.SetBounds
    ... missing something here? ... Letting is become visible and then setting ... Steve ... Prev by Date: ...
    (microsoft.public.dotnet.languages.vb)
  • Re: Exclusive checkboxes
    ... only one option button on the whole page/sheet can be selected. ... I dont know if there is a way of grouping the options together. ... let me know if I am missing something. ... Prev by Date: ...
    (microsoft.public.excel)
  • Re: stop script if dates are missing, edit help...
    ... he wanted the ability to enter the start date in 1/1/2005 format and ... right on column J, which is K, if any of those are missing to print out ... msg box and basically stop and say: make sure the dates in the range ... Prev by Date: ...
    (microsoft.public.excel)