ESR meter
- From: "danbob5" <supplee1@xxxxxxxxxxxxx>
- Date: Sun, 29 May 2005 23:35:14 -0400
I built the poptronics esr meter with a FAR circuit board. when i check a
regular cap it works as it should but when i check a electolitic it
generates about 5 to 10 % more voltage at the meter than when the probes
are touched and the meter is zeroed out. I have checked all componet
location & polarity 3 times and the voltages are good checked with meter &
O scope. any ideas?
Dan
.
- Prev by Date: Re: Lithium battery "refill" business
- Next by Date: Re: Lithium battery "refill" business
- Previous by thread: Wanted: TA1223AN IC pulled from scrap.
- Next by thread: gaming steering wheel
- Index(es):
