Fixed : PTK169 B+ still high

The 15 volt rectifier, D4118, was the problem. Set works great now.

"Roy and Rosa" <rbeaty@xxxxxxxxxxxxx> wrote in message
news:119v3vcel2lac58@xxxxxxxxxxxxxxxxxxxxx
> PTK169AV had shorted hv splitter.
> I dont have repair manual. I checked other posts I could find on net.
> I replaced the 4 caps around smps. B+ in standby is 168 volts and drops
to
> 160 volts in run.
> I adjusted the pot labeled B+ reg, the one under the black snap cover, It
> made no effect on standby and only drops to 159 volt in run.
> I used RCA caps for 15 and 39 uf caps...105 deg.C for the other 2.
> What else should I look for? Is there a pot I missed for standby
> adjustment?
> Thanks
>
>


.

Relevant Pages

  • Re: Fixed : PTK169 B+ still high
    ... >> I dont have repair manual. ... >> made no effect on standby and only drops to 159 volt in run. ... >> adjustment? ...
    (sci.electronics.repair)
  • Re: CPU or Motherboard
    ... and measure the VSB line (purple wire). ... find it's higher than 6 volt! ... the standby part of the chip, but enough to slowly "Cook it's Goose". ...
    (uk.comp.homebuilt)
  • Re: Need Centipede Help!
    ... It is an upright cabinet. ... a slight adjustment of the +5 volt power supply. ...
    (rec.games.video.arcade.collecting)
  • Re: capacitors in series
    ... I have two capacitors in series. ... I want to put 35 volt acrosse (cause I ... but they dont talk much about the ratings. ... You mean you got 35V without the caps? ...
    (sci.electronics.basics)
  • Re: capacitors in series
    ... I have two capacitors in series. ... I want to put 35 volt acrosse so I want to use 25 v rated. ... There are a lot of parallel and series formula on google, but they dont talk much about the ratings. ... and have a 2200 uF 63 volt cap. ...
    (sci.electronics.basics)
Loading