Re: Quasar VCR Model VH-420 - Testing of Power Supply?
sofie wrote:
Ken:
You are right about the control head, but actually Ken, the control head
(A/C Head) is the furthest right..... after the video heads and exit roller
guide.... right before the capstan and pinch roller. The lower part of
that head, if it has any kind of build-up or debris on it can cause the
symptoms Peter Smith mentioned in his original posting.
The head that you mentioned on the left that first head that the tape
touches on the left before it goes past the roller guides and video drum is
the FULL ERASE HEAD and problems with that head would not produce any bad
symptoms when playing back good pre-recorded tapes.
Arghhh. You're right of course, Sofie.
I did warn you guys that I'm getting on in years, and
not handling it at all well, didn't I? :(
Sorry about that.
Ken
.
Relevant Pages
- Re: Samsung TI 14N3 TV / VCR combo
... >> The brass roller that you removed was put there by the manufacturer to ... >> NOTHING to do with cleaning the tape as you surmised. ... >> usually after the full erase head but sometimes before. ...
(sci.electronics.repair) - Re: Slip Rolls (Possibly)
... I've got a rough idea of a plan in my head. ... Since the longest bend I need will only be about 180 degrees ... I really wouldn't want to use roller or ball bearings for that sort of ...
(uk.rec.models.engineering) - Re: Quasar VCR Model VH-420 - Testing of Power Supply?
... You are right about the control head, but actually Ken, the control head ... after the video heads and exit roller ... right before the capstan and pinch roller. ...
(sci.electronics.repair) - Re: Problem with Sony Betamax VCR
... Video heads mainly, ... Caution is advised - improper technique can ruin the video ... The video mute is controlled by the sync signal from the control head, ...
(sci.electronics.repair) |
|
