Re: Wish list: Tidy Test Leads

"Leonard Caillouet" <no@xxxxxx> wrote in
5YoGe.4309$Tr6.3931@lakeread02:">news:5YoGe.4309$Tr6.3931@lakeread02:

> Wrap them the other way. They wrap nicely on the 187 in one direction
> but not in the other.
>

It must have been a left-handed engineer who designed it!
[Left hand being the "sinister" hand.] 8-)

(I'm left-handed,and so is ~10% of the population)

--
Jim Yanik
jyanik
at
kua.net

> Leonard
>
> "KLM" <klmok88@xxxxxxxxx> wrote in message
> news:xRfGe.63705$s54.34289@xxxxxxxxxxx
>> My FLUKE 77 multimeter has a pretty good snap-on rubber carrying case
>> that has a belt hook and snap-in recesses for parking the test
>> probes. My beef
>> is that when the test leads are wound around the meter and the test
>> probes
>> stored in place the leads cannot be wound snugly. I wish FLUKE and
>> other instrument manufacturers will provide the right length of wire
>> leads so that
>> everything can be stored neatly.
>>
>>
>
>
>



.

Relevant Pages

  • Fluke 800A bench multimeter: normal behaviour or defect?
    ... I've recently acquired an old bench multimeter, a Fluke 800A. ... When shorting the leads, it displays correctly. ... If it's repair that's needed, any idea where to start looking? ...
    (sci.electronics.repair)
  • Re: Wish list: Tidy Test Leads
    ... > My FLUKE 77 multimeter has a pretty good snap-on rubber carrying case that ... > has a belt hook and snap-in recesses for parking the test probes. ... > stored in place the leads cannot be wound snugly. ... I wish FLUKE and other ...
    (sci.electronics.repair)
  • Re: Amp voltage testing question
    ... transformer leads tested from lead to lead or lead to ground (B+, ... the secondary leads and from each lead to the center tap. ... If you're using the original Fluke ... To be on the safe side, when measuring PT HV secondaries, clip on ...
    (alt.guitar.amps)
  • Differential probes
    ... a Fluke DP120 20MHz 1:20/1:200 probe loaned to me by an Agilent sales rep. gives miserably ringing edges. ... The Fluke is kind of silly in having 4 ft. long heavy cables with huge probes that look suitable for heavy duty power distribution probing. ... The Fluke must have a power supply in there to generate a negative supply, whereas the Tek just pulls clean power from the scope. ...
    (sci.electronics.design)
  • Re: Whats your best guess?
    ... |> All this may become clearer to me when I have a digital volt meter in hand. ... |> probes with everything plugged in for normal computer operation. ... Think these leads should work OK? ...
    (alt.comp.hardware.pc-homebuilt)