Re: Supporting TV chassis while open

"Tom MacIntyre" <tom__macintyre@xxxxxxxxxxx> wrote in message
news:jvnoh1pimal2a19an83g2kd68ph44b7mk9@xxxxxxxxxx
>
> I have also been concerned, though, about what Tom is referring to,
> the way the remaining heavy CRT and not much cabinet tends to sway in
> the breeze.

Hell, my CTC177 doesn't sway -- it would immediately fall backwards if I
tried to let it stand when the cover is off. I can only let it sit open
with the screen tilted down, which makes the board hang, and makes it
impossible to work with power on. How can you work on things like this?


> I don't think you need to worry about Tom and a hot chassis. :-)

'Cause I'm too chicken? It depends on the chassis though.


--

Reply in group, but if emailing add
2 more zeros and remove the obvious.


.

Relevant Pages

  • Re: Amp Squealing at high Gain
    ... Tom wrote: ... Is the amp *cabinet* completely stock? ... The 'fix' was to make sure that the metal shield plate in the cabinet ... made electrical contact with the chassis when the chassis was mounted ...
    (alt.guitar.amps)
  • Re: Isolation Transformer
    ... Tom wrote: ... Well the chassis should be grounded, I've never seen a ground wire soldered to it with a Molex connector on it, but you can wire that to earth ground in whatever way is convenient. ... All metal hardware in the cabinet should be grounded. ...
    (rec.games.video.arcade.collecting)
  • Re: RAS and CMS combo table
    ... tom wrote: ... is mounted to a small cabinet on locking casters, ... and has a dust port on the back ... dresser workbench. ...
    (rec.woodworking)
  • Re: Confessions of a paranoid woodworker
    ... while the computer is on & try exhausting the cabinet only, ... lead to pet hair problems. ... Tom ... Many computer problems are caused by insufficient cooling. ...
    (rec.woodworking)
  • WTT - Roadshow and Fishtales for TZ AF TOM - Phila area
    ... Roadshow - in great condition. ... Minor touch up to cabinet. ... Fishtales - PF in great condition, No wear at fish or anywhere. ... Looking for a nice TZ, AF, TOM. ...
    (rec.games.pinball)