Re: Will this work??
- From: "jlatenight" <jlatenight@xxxxxxxxxxx>
- Date: 11 Sep 2005 19:33:54 -0700
James Sweet wrote:
> Anything for a camcorder is probably a switching regulator (lightweight box,
> not a big heavy transformer) so the regulation should be decent.
Thanks everyone for your responses. Here is the one I bought:
http://www.simacorp.com/products/item.ep.html?session=e53cac0513088967baa590bf6e541136&id=493
Specifications SUP-60
Input Voltage 120 VAC
Output Voltages / Maximum Current
3.3 Volts / 2.1 Amps
4.2 Volts / 2.0 Amps
5.0 Volts / 1.9 Amps
6.5 Volts / 1.7 Amps
8.4 Volts / 1.6 Amps
9.5 Volts / 1.5 Amps
Dimensions 3.0" x 1.5" x 0.8"
I'll measure the voltage and current at 6.5v & 8.4v and see which one's
closer at no load. Just wondering how to know if the camera can handle
..5v or so higher than it needs. And it does say "[this device] is
fully regulated using high efficiency switching technology and features
overload and short circuit protection."
.
- Follow-Ups:
- Re: Will this work??
- From: Tom MacIntyre
- Re: Will this work??
- From: James Sweet
- Re: Will this work??
- References:
- Will this work??
- From: jlatenight
- Re: Will this work??
- From: tnom
- Re: Will this work??
- From: James Sweet
- Will this work??
- Prev by Date: Re: Intel al440lx board ram
- Next by Date: Re: Philips DVP642 DVD player not starting up
- Previous by thread: Re: Will this work??
- Next by thread: Re: Will this work??
- Index(es):
Relevant Pages
|
