Re: PC Speakers / Ampilier - No Output from Left Channel
- From: "Leonard Haney" <ljhaney587@xxxxxxxxxxxxx>
- Date: Sat, 24 Sep 2005 20:42:10 GMT
Mark,
Check for something broken on the circuit board at the headphone jack. I've
had the jack fail, bad solder joints, or cracks in the foil traces cause
this. If you have an oscilloscope, look at the wave form coming into the
jack area for the left and right channels. It might be an easy fix. Good
luck...
Lenny
"ML" <ml@xxxxxxxx> wrote in message
news:433395c6$0$16316$ed2619ec@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Hi,
>
> I have an Creative I-Trigue® 2.1 3300 setup on my PC which has developed a
> fault i.e. no output from the left channel.
>
> The amp is built into the subwoofer, so the power cord, volume
> control/headphone socket and speakers all connect to the back of the
> subwoofer.
>
> As I said the left channel output from the system has gone completely
> dead - both for the speaker output AND the headphone output, so I assume a
> component on the circuit board has died.
> I have tried them in a different PC and the left channel is still dead.
>
> Unfortunately the product is outside its warranty period, and the local
> repair shop charge nearly half of what I paid for the system, just to have
> a look !
>
> I have searched the Creative support forum and it looks like a few people
> have had the same issue, but ended up getting replacements under the
> warranty.
>
> I appreciate this is a bit of a stab in the dark without the schematics,
> but can anyone suggest what might be at fault, going by the fault
> description ?
>
> Thanks for any help.
>
> Mark.
.
- References:
- Prev by Date: Re: viewsonic monitor screen size fluctuation
- Next by Date: Re: MARANTZ PM710DC amplifier schematics
- Previous by thread: PC Speakers / Ampilier - No Output from Left Channel
- Next by thread: PAL Famicom on NTSC TV. nintendo disk system
- Index(es):
Relevant Pages
|
