Re: Tube replacement help...




"Michael A. Terrell" <mike.terrell@xxxxxxxxxxxxx> wrote in message
news:433A59B6.ED2A8C69@xxxxxxxxxxxxxxxx
> 30W wrote:
>>
>> Hello all,
>>
>> I ordered some replacement tubes for an old radio for a friend. All
>> the tubes seemed ok except for two. One of them is missing a pin that
>> the original had and one has an extra pin that the original did not.
>>
>> My question is do these pins matter? Is it possible all the pins are
>> not being used?
>>
>> Original Tube Replacement Pins
>> 6BG6GA 6BG6G Extra pin
>> 35Y4 35Y4 Missing pin
>>
>> They are going in a Sears Silvertone Radionet.
>>
>> Thanks alot for any info!!
>>
>> M. M.
>
>
> news:rec.antiques.radio+phono is where the tube people hang out.
>
> --
> ?
>
> Michael A. Terrell
> Central Florida

Is where SOME tube people hang out. Not all tube equipment is antique, or
even vintage. Much is still manufactured now.

Arfa


.



Relevant Pages

  • Re: Tech: For the EM guys and "Old" electronics!!!
    ... through a circuit board (containing a vacuum tube), ... And they are used to ground one pin of the socket. ... I may be upside down on which wire is which? ... one of the pins on that socket??. ...
    (rec.games.pinball)
  • Re: Tech: For the EM guys and "Old" electronics!!!
    ... but placing the stepper in series ... with the tube and turning the tube off and on with the transistor's ... It seems the most likely scenario is an encased relay on a 9-pin ... 3 of the pins are clustered together and are ...
    (rec.games.pinball)
  • Re: Tech: For the EM guys and "Old" electronics!!!
    ... but placing the stepper in series ... with the tube and turning the tube off and on with the transistor's ... It seems the most likely scenario is an encased relay on a 9-pin ... 3 of the pins are clustered together and are ...
    (rec.games.pinball)
  • Re: Tech: For the EM guys and "Old" electronics!!!
    ... tubes that have internal relays, but placing the stepper in series ... with the tube and turning the tube off and on with the transistor's ... 3 of the pins are clustered together and are ...
    (rec.games.pinball)
  • Re: Toshiba tube shorted. Can I clear it?
    ... The tube is shot anyway. ... The short is not to the heater. ... >> The red gun is shorted I dont know the label of the other pins that are ...
    (sci.electronics.repair)

Quantcast