Hitachi 50EX10B. I have the convergence looking almost perfect, except I can't straighten out the bow (down) on the bottom of the screen
viewing cross hatch pattern. I had no control of blue, so I replaced
all the convergence amp IC's (figured good idea since the set is 11
years old). This fixed the blue problem. I can get about the center 2/3
of the bottom line to straighten, but both corners turn down, and no
conv. adjustment on the board removes this. I don't see where I can
adjust anything else to fix this. Is there another component at fault?
Thanks to all.
Re: Convergence problem ... I have the convergence looking almost perfect, ... This fixed the blue problem.... > of the bottom line to straighten, but both corners turn down, and no ...adjustment on the board removes this. ... (sci.electronics.repair)
Re: Convergence problem ...kip wrote: ... This fixed the blue problem.... >> of the bottom line to straighten, but both corners turn down, and no ...adjustment on the board removes this. ... (sci.electronics.repair)
Convergence solved Hitachi 50dx10b ... Snagged a free 2001 50" projection TeeWee Hitachi 50DX10B. ... up OK.The convergence was way off, mostly blue to the right and up. ...'Shift' button enabled adjustment, using the Vol and Channel buttons. ... (sci.electronics.repair)
Re: Screen font size? ... Rather than using the text size adjustment, use the Zoom feature of IE7 ... located at the bottom right of the IE7 window.... Many site designers don't cater their site to such accessibility adjustments ... (microsoft.public.windowsxp.newusers)
Re: Convergence solved Hitachi 50dx10b ... up OK.The convergence was way off, mostly blue to the right and up. ...'Shift' button enabled adjustment, using the Vol and Channel buttons. ... I'd clean what I could with a vacuum. ... (sci.electronics.repair)
