Re: Sylvania 27" tv Brightness Flickers


Michael Kennedy wrote:

> Could this be caused by the wire going from the flyback to the cathode?

The "Flyback to cathode wire"!? Jeez.....

No it is caused by the brightness to darkness tube failing.

.

Relevant Pages

  • Re: Sylvania 27" tv Brightness Flickers
    ... I was talking about the HV wire going to the CRT. ... flyback to the Cathode... ...
    (sci.electronics.repair)
  • Re: Electropolishing
    ... > comment about using copper for the cathode might be what I'm missing. ... > balance, and low electrolyte temperature. ... > using 308 stainless wire as wire ...
    (rec.crafts.metalworking)
  • NAP PTV 5/6/7XX flybacks
    ... The extra pin on the flyback, ... below and just solder the wire in. ... Within two raster lines all the way to the edges. ...
    (sci.electronics.repair)
  • Re: NAP PTV 5/6/7XX flybacks
    ... > The extra pin on the flyback, ... > below and just solder the wire in. ... Within two raster lines all the way to the edges. ... I decided to ground the extra pin of the flyback in case ...
    (sci.electronics.repair)
  • Re: Magnavox FP5230 repair
    ... > Are you saying this transistor, that fuse resistor, and the ... >> flyback, ... to the mechanics of the clip that holds the HV wire into the flyback. ... I think maybe the replacement flybacks come with a new clip nowadays. ...
    (sci.electronics.repair)