Re: Sylvania 27" tv Brightness Flickers

Sorry. I couldn't remember what it is called. EXCUSE ME for not beign an
expert I don't do this for a job.

I was talking about the HV wire going to the CRT. (cathode ray tube) I
describet quite well what I was talking about. The wire does run from the
flyback to the Cathode (CRT)...
"Just Another Theremin Fan" <
> wrote in message
> news:1128696063.624361.170000@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> Michael Kennedy wrote:
>
>> Could this be caused by the wire going from the flyback to the cathode?
>
> The "Flyback to cathode wire"!? Jeez.....
>
> No it is caused by the brightness to darkness tube failing.
>


.

Relevant Pages

  • Re: Sylvania 27" tv Brightness Flickers
    ... Michael Kennedy wrote: ... The "Flyback to cathode wire"!? ...
    (sci.electronics.repair)
  • Re: Electropolishing
    ... > comment about using copper for the cathode might be what I'm missing. ... > balance, and low electrolyte temperature. ... > using 308 stainless wire as wire ...
    (rec.crafts.metalworking)
  • NAP PTV 5/6/7XX flybacks
    ... The extra pin on the flyback, ... below and just solder the wire in. ... Within two raster lines all the way to the edges. ...
    (sci.electronics.repair)
  • Re: NAP PTV 5/6/7XX flybacks
    ... > The extra pin on the flyback, ... > below and just solder the wire in. ... Within two raster lines all the way to the edges. ... I decided to ground the extra pin of the flyback in case ...
    (sci.electronics.repair)
  • Re: Magnavox FP5230 repair
    ... > Are you saying this transistor, that fuse resistor, and the ... >> flyback, ... to the mechanics of the clip that holds the HV wire into the flyback. ... I think maybe the replacement flybacks come with a new clip nowadays. ...
    (sci.electronics.repair)