Re: Viewsonic G810 Focus Problem

Mark Smith wrote: 
Installed new flyback to restore high voltage. Now can't get good focus.
When focus is good in center, it's poor on sides & corners.
When it's good on sides & corners, it's poor in center.
This is the first G810 I've ever repaired. CRT seems good & strong
with great grey scale.

Thanks in advance.





Sounds like you got the two focus leads swapped, check the wires that go to the neck board, colors can be deceptive, try swapping the two focus leads and see what happens. Make sure you don't swap the G2 with one of the focus though.
.