Canon Pixma IP 2000 Power Supply - part number K30229

Hi All,

I've got a Canon Pixma IP 2000 with (what I believe to be) a blown
power supply (European Version) Input 220/240 volt, 50/60HZ 0.35A and
Output 24 Volt 1.1A.

I've tried the obvious stuff, there is no power connection buzz when
its connected and no output detected at the molex socket output side.

The power out (to the printer) is by way of a molex plug that has two
blue and one red wire.

Does anyone know how the power to the wiring is arranged for this (is
it just that the red is 24v + and the blue ground? - why two blue
wires?) - alternatively where could I get a replacement - I can't find
anything on the web so far.

Regards, Roy
.

Relevant Pages

  • Re: Canon Pixma IP 2000 Power Supply - part number K30229
    ... The power supplies can be found on Ebay and from Canon. ... seem to sell printers they got bundled with other machines ... its connected and no output detected at the molex socket output side. ... blue and one red wire. ...
    (sci.electronics.repair)
  • Re: Marine Radio install question
    ... directly to the battery for a continious power source. ... Maybe your old radio had this feature, or just needed power for the memory & clock. ...
    (rec.boats.electronics)
  • Re: Ceiling Fan Dimmer Switch
    ... I've got a lot of experience with home wiring, but when I have to ask a ... When I found a stray red wire, my electrician told me it was carrying 220v ... probably for a second circuit. ... circuit than what I was working on, and still had power. ...
    (alt.home.repair)
  • Re: White, Black, Green, Blue and RED lighting wire ?
    ... Turn the power back on and check with a voltage tester ... Flip the wall switch and test again. ... there is a red wire from the ceiling and the instructions do ...
    (alt.home.repair)