Re: speaker box assignment
4+ liters sounds big for a 4" woofer to me. Particle board or plywood (high
grade, very fer voids) are good choices.
.
Relevant Pages
- Re: The plywood monocoque car guy
... I believe that the term "marine" only specifies that the glue ... between the plies is not water soluble; so an acceptable grade of plywood ... The glue in marine plywood does have to be waterproof, ...
(rec.aviation.homebuilt) - Re: The plywood monocoque car guy
... I believe that the term "marine" only specifies that the glue between the plies is not water soluble; so an acceptable grade of plywood may not be as close as your nearest "Borg". ... Marine plywood also has a higher quality standard for the inner plys, with a higher standard of species allowed in the interior plys allowed, and no voids allowed, although they are allowed to have plug repairs in the inner plys, as I recall. ... The glue in marine plywood does have to be waterproof, but more significantly, remain strong while submerged in water for some specified period of time. ... Any plywood meant for construction that bears an "X" in the name has waterproof glue, but it will have voids and repairs allowed, varying with the grade. ...
(rec.aviation.homebuilt) - Re: dado sets: comments on delta 35-7680?
... plywood (especially oak). ... the B grade starting around $85. ... I'm just wondering where this Delta blade fits into the mix. ...
(rec.woodworking) - Re: Marine or regular plywood
... Marine grade plywood typically has the voids filled as each layer is ... underside unsealed so that it could dry when it got wet. ... removed the foam and did not refill with foam. ...
(rec.boats) - Re: Marine or regular plywood
... Marine grade plywood typically has the voids filled as each layer is ... underside unsealed so that it could dry when it got wet. ... removed the foam and did not refill with foam. ...
(rec.boats) |
|
