Re: 50 hz timer motor

Sam Goldwasser wrote: 
I now have the timer mechanism in my possesion.

There is a synchronous motor which drives 4 gears as follows:

           Driven   Drive
Shaft      Teeth    Teeth     Gear:Gear      Ratio        Period (60Hz)
------------------------------------------------------------------------------
Motor                 12     Motor:G1   12:50   1:4.17       15 Hz
G1          50        16        G1:G2   16:40   1:2.5        3.6 Hz
G2          40        10        G2:G3   10:45   1:4.5        1.44 Hz
G3          45        12        G3:G4   12:48   1:4          0.32 Hz
G4          48                                               0.08 Hz (12.5 s)

Gear G4 engages the inside of a funny large ring gear - it has teath missing
every 12th position.  Every 12.5 s, the cam switch moves one position.
However, there is a lever in the middle of the mechanism which seems to
be wanting to engage something that isn't there.  When that lever is
prevented from moving a certain way, the main cam doesn't step.  However,
I can't quite see what it's really doing without further disassembly.

So, is it possible there is some escapement that is missing
on this unit?  There are at least two posts that look like they may be
for additional gears or something but that's not conclusive.

Perhaps the original theory that something is missing deserves more
consideration.

One thing I'm quite sure of is that the 50/60 Hz thing is irrelevant as
far as this mechanism is concerned.  The motor feels like it has around
the 8 poles required to account for the 15 rps speed at which it is running
(at 60 Hz).

--- sam

Sam, there`s usually a kind of 'rocking lever' a bit like a clock escapement. It`s dificult to see where any parts could go missing to unless it`s been 'got at' previously.

Ron (UK)

--
Lune Valley Audio
Public address system
Hire, Sales, Repairs
www.lunevalleyaudio.com
.