Re: sony KV-27FS100 set dead.

Also inspect all the soldering around the horiz drive and output circuits.
"JANA" <jana@xxxxxxxxxxxx> wrote in message
news:3u4qk9Fv802iU1@xxxxxxxxxxxxxxxx
> The answer is YES. But you should also verify if the scan generator output
> will be reaching the horizontal output transistor. They may also have been
> a
> failure in the horizontal driver area as well.
>
> In many instances, if the horizontal output device is blown, there may
> also
> be problems with the power supply, and support circuits that work with the
> horizontal output stage.
>
> --
>
> JANA
> _____
>
>
> "clinton" <tabler@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
> message news:p46dnS5eK6R1suDeRVn_vA@xxxxxxxxxxxxxxx
> sony tv dead with stanby light blinking. I replaced the horizontal
> output transistor and turned on set and it shorted the output
> transistor at turn on.
> could the high voltage transformer also be shorted?
>
>


.

Relevant Pages

  • Re: What is this clicking in the color tv?
    ... Check the horizontal output transistor first. ... I don't like just replacing parts without being sure I have found the ... Even though I found a few google hits for a D1398, ...
    (sci.electronics.repair)
  • Re: sony KV-27FS100 set dead.
    ... But you should also verify if the scan generator output ... will be reaching the horizontal output transistor. ... In many instances, if the horizontal output device is blown, there may also ...
    (sci.electronics.repair)
  • Re: JVC Replacement Parts or Cross REF.
    ... Convergence IC failure usually doesn't kill the ... horizontal output. ...
    (sci.electronics.repair)