Re: sony KV-27FS100 set dead.

From: "JANA" <jana@xxxxxxxxxxxx>
Date: Thu, 17 Nov 2005 20:49:15 -0500

The answer is YES. But you should also verify if the scan generator output
will be reaching the horizontal output transistor. They may also have been a
failure in the horizontal driver area as well.

In many instances, if the horizontal output device is blown, there may also
be problems with the power supply, and support circuits that work with the
horizontal output stage.

--

JANA
_____

"clinton" <tabler@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:p46dnS5eK6R1suDeRVn_vA@xxxxxxxxxxxxxxx
sony tv dead with stanby light blinking. I replaced the horizontal
output transistor and turned on set and it shorted the output
transistor at turn on.
could the high voltage transformer also be shorted?

.

Follow-Ups:
- Re: sony KV-27FS100 set dead.
  - From: Art

References:
- sony KV-27FS100 set dead.
  - From: clinton

Prev by Date: sony KV-27FS100 set dead.
Next by Date: Re: 50 hz timer motor
Previous by thread: sony KV-27FS100 set dead.
Next by thread: Re: sony KV-27FS100 set dead.
Index(es):
- Date
- Thread

Relevant Pages

Re: What is this clicking in the color tv?
... Check the horizontal output transistor first. ... I don't like just replacing parts without being sure I have found the ... Even though I found a few google hits for a D1398, ...
(sci.electronics.repair)
Re: sony KV-27FS100 set dead.
... But you should also verify if the scan generator output ... > will be reaching the horizontal output transistor. ...
(sci.electronics.repair)
Re: JVC Replacement Parts or Cross REF.
... Convergence IC failure usually doesn't kill the ... horizontal output. ...
(sci.electronics.repair)