"Cracking Open" A Kodak Carousel 4400

I have a "new look" Carousel 440 that works OK but is filthy inside. I
want to open it up and clean all the gunk out but I can't get the case
open. I've taken the 5 screws ot of the bottom but something is still
holding the case halves together over on the side where the control
panel is.

It looks like there might be a screw hidden under the clear control
panel piece, or maybe the bottom slides off at a weird angle.

What's the secret to getting the case open?

Thanks in advance,

-W Sanders

.

Relevant Pages

  • Re: Seeking hints on building a control panel ...
    ... my panel fed through an appropiately wired pair of diodes. ... LGB auxiliary contacts added to the EPL turnout motors to cut-off power to ... 4-6-0 pilot trucks to track through the spring switches reliably. ... and mounted my control toggle switches and pushbuttons to that surface. ...
    (rec.models.railroad)
  • Re: regional setting
    ... account has the symptoms of not allowing regional setting via the control ... panel GUI interface. ... This ensures that the date separator and the date format are ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Video adapter question second try. Dual monitor
    ... That is why the Display control panel will have a "force detection" ... I have a Dell 9300 with an ATI Mobility Radeon X300 video card. ... be a separate driver file and a separate CCC file, ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Receiver Control Panel
    ... >> is slightly separated from where the receiver case itself would sit. ... My thought is that the control panel probably has ... > up enough extra for each pot so that you can wrap the entire pot casing. ...
    (sci.electronics.repair)
  • Re: Removing all traces of MS-Office (versions 2K and XP)
    ... I found out how to remove Office XP via the Control ... Control Panel and then reinstall it. ... >Description of the Windows Installer CleanUp Utility ... >| Applications does show Excel/Word starting, ...
    (microsoft.public.office.setup)