Re: Relisys TE770 monitor



"N Cook" <diverse@xxxxxxxxx> wrote in message
news:do1iat$s22$1@xxxxxxxxxxxxxxxxxx
> Only 3 years old, LED blinking and relay clicking on and off.
> The "on/off" switch short circuits the mains SMPS side of the opto
isolator
> to switch "off" the monitor, bit unusual.
> Disabled the line output drive and running from 50 percent mains
> and same clicking/ticking.
> Stable 7V or so on the driver side of the opto-isolator
> and a 7805 gives a stable 5V for the micro area.
> PS Ds and Cs seem ok
> Any ideas where to look other than tracing back from the relay, LED area
and
> back to the
> PS rails.
>
> --
> Diverse Devices, Southampton, England
> electronic hints and repair briefs , schematics/manuals list on
> http://home.graffiti.net/diverse:graffiti.net/
>
>
>

A schematic for this monitor is on
http://www.eserviceinfo.com/index.php?what=search2&searchstring=TE770

Now I've found out what RAR file types are and downloaded
Hervé Thouzard 's " UnzipThemAll " to pdf




.



Relevant Pages

  • Re: function of multisync relay
    ... there are two transitions where the relay doesn't click. ... > monitor's power supply as required by different resolutions and scan rates. ... > If your monitor is anything like one of the NEC MultiSync 95 units I have, ... > then you have capacitors working on going bad in the monitor. ...
    (sci.electronics.repair)
  • Re: lighting---hacked!
    ... > You rely on ipchains/iptables to stop inappropriate packets from ... > You relay on your logging to monitor and alert you to this. ...
    (comp.os.linux.security)
  • Re: hvac control and ammeter
    ... the circuit breaker for the ... I'd like to monitor the current that the unit draws. ... I'm also planning on using a relay (Potter & Brumfield K10P-11D15-12, ... rated for 15A, 1/3HP, 120VAC) to control the unit. ...
    (sci.electronics.design)
  • Re: multisync CRT monitor horizontal sweep
    ... relay by sound if I can run the monitor without the back and base. ... >> waking it, or changing screen resolutions, can cause the problem to ... >> circuit each time I put the computer to sleep or changed resolutions. ...
    (sci.electronics.repair)
  • function of multisync relay
    ... I have an NEC MS75 CRT monitor that's 3 or 4 years old. ... There's a relay that clicks when I change resolutions ... resolutions, there are two transitions where the relay doesn't click. ...
    (sci.electronics.repair)