JVC av56wp30 56" TV, no red convergence control
I have a customers set in the shop, that the red convergence is way off,
and the on screen convergence settings will let me move the red from side
to side, but the up-down controls don't work at all. I am guessing a chip
or other component in the convergence circuit has popped. Anynbody seen
this in this model? Thank you much...
Mike Shullaw
Lee's TV
Lincoln Ne.
.
Relevant Pages
- Re: Mitsubishi VS-582R focus malfunctions
... is the red convergence, 1 is the blue convergence, one is an STK4275(focus ... >> deflection board, and convergenced board, up and down, left and right ... >> i cleaned the pots, ...
(sci.electronics.repair) - Re: Mitsubishi VS-582R focus malfunctions
... is the red convergence, 1 is the blue convergence, one is an STK4275(focus ... > Other times, the 3 pots dont take affect at all, and if so, very little. ... > one time I was able to push a little bit on the deflection board, ...
(sci.electronics.repair) - Pioneer SD-P6081 convergence problem, tried replacing all caps + stk4277 = no luck. I need help or a
... The convergence went out suddenly... ... bad/defective STK4277 chip. ... The center point red convergence moves ... Here are some pictures, the filenames are pretty self explanatory. ...
(sci.electronics.repair) - Re: JVC av56wp30 56" TV, no red convergence control
... Replace both STK convergence IC's, ... >I have a customers set in the shop, that the red convergence is way off, ...
(sci.electronics.repair) - Re: 52" RCA Rear Proj. TV arcing
... get it from Asti Magnetics, ... Any shop should cut you a break. ... Tell you this also, in my position, top tech pulling down top buck I do ... convergence and the control range on the crosshairs. ...
(sci.electronics.repair) |
|
