Re: Sony DVP S300 - distorted pic and sound



Thanks Mark,

Will do some fishing around the board. Just wanted to be in the right pond
:-)

Would not bother to replace the laser, but a bad cap may be economical to
replace if I find it.

Regards,

Rich

"Mark D. Zacharias" <spammenot@xxxxxxxxxxxx> wrote in message

> I dunno - we do see lots of laser pickups bad, but if it continues to play
> through the disc, the main board could be bad. Not much you can really do
to
> troubleshoot; either replace the pickup and hope that fixes it, or if that
> doesn't fix it, start looking closer at the board - maybe a capacitor
> leaking for example.
>
> Obviously - the problem is cost. A new player is cheaper than a
replacement
> pickup, and cheaper by far than the board.
>
> Welcome to the exciting world or electronic repair!



.



Relevant Pages

  • Re: CD player whine ... how big and costly a fix?
    ... I have started getting a distinct whine with most every ... and there is a particular problem with a particular Sony optical pickup. ... Before doing anything else at all, clean the laser. ... output stages, and the heat convection currents carry the dust up inside, ...
    (sci.electronics.repair)
  • Re: Question regarding DVD/CD-ROM drive
    ... >>The only thing you can do is clean the laser in these drives. ... > does work, and can risk damage to the optical pickup itself, namely ... > Some optical pickups, like Sony, are pre-calibrated at the factory. ...
    (sci.electronics.repair)
  • Re: Collimation Question
    ... If the cap (which is some kind of sight tube) and the laser do not agree, ... The problem is when I use the collimation cap, ...
    (sci.astro.amateur)
  • Re: Playstation 2, last chance
    ... adjusting the angle of the laser (turning the little white ... Secondly, if the console had a lot of dust in the drive, you would also have to ... And you shouldn't because tweaking the laser gain potentiometers on the pickup ...
    (sci.electronics.repair)
  • Re: Playstation 2 repair
    ... >I've also adjusted the pots on the laser eye itself. ... The angle adjustment for the traverse is easy to correct, ... In the case of PS-2s with the Sanyo pickup, a metal peg to the left of the ... observing the "SONY" brand molded on the top of the black pickup housing next ...
    (sci.electronics.repair)