Re: Magnavox FP5230 repair

Second response since I've looked into replacing these parts. I can get a replacement flyback transformer supposedly for $81.70 at PartseStore.com

http://www.partstore.com/ModelDetail.aspx?PageState=1&MfgID=148&ModelID=168744

It fits my television model perfectly, but I don't know if that's T900. There's one for $74 also; what do I use?

Q906 is a D1556, with "4E" printed on it in smaller letters. Discarding the 4E, I can get a replacement NTE2331 for ~$6. The fuseable resistor should be easy enough to find locally. Maybe I can get this all locally--anybody know good parts places in Austin, TX? Just thought I'd ask.

I see the transistor is used for horizontal deflection. So would that explain the lack of display right there? What about vertical?

Given that fuseable resistor and that transistor are burnt, what else should I consider replacing?
.

Relevant Pages

  • Re: DE switch matrix/transistor problem -- Fixed
    ... repair the mis-wired flipper (it was weak because it was ... I can't cause those switches to open/close at all. ... Tracked it down to a blown transistor on C8 in the matrix. ... Am I leaving myself wide open to keep replacing that ...
    (rec.games.pinball)
  • Re: Tech: Cyclone
    ... All the fuses were checked before the weekend, ...  I may have jumped the gun replacing it, ... transistor with a jumper wire since there's no large coil, ...
    (rec.games.pinball)
  • Star Wars relay problem
    ... Short circuit on my GI last night and the 4 yellow/white cables from ... GI relay doesn't work at all. ... Shorted the transistor + diode to ... replacing them with two new ones (tested OK before soldering them to ...
    (rec.games.pinball)
  • Re: WORKING replacements for Zetex ZTX transistors in ZX Spectrum?
    ... transistors over here in Germany. ... A transistor is a fairly simple device. ... exceeds the current load of the one you're replacing should do, ... faster than the one you're replacing it'll work. ...
    (comp.sys.sinclair)
  • Tech: DE switch matrix/transistor problem
    ... Was having "Ball Missing" ... Tracked it down to a blown transistor on C8 in the matrix. ... replaced the chip. ... Am I leaving myself wide open to keep replacing that ...
    (rec.games.pinball)