Old monitor turns itself off even when disconected - help!
- From: midix <midix.23dd0l@xxxxxxxxxxxxx>
- Date: Fri, 17 Feb 2006 10:08:42 +0000
I have an old EIZO 14'' FLEXSCAN 9060S monitor and I need it to be
working at least for a month. At first it worked fine although was
second hand already. But then it started switching itself off after 10
minutes or so. I decided that I have nothing to lose and started
adjusting SUB H. SIZE inside of it (because I noticed that the iamge on
the screen has black sides, it is not wide enough). And after that it
worked fine for 2 months. Then I bought a new one and put my EIZO away
in a bit cool place (but not wet). After 2 years I need it again but
now it turns itself off after 4 seconds or so no matter if I connect
VGA to PC or no. With SUB H. SIZE I can only change the time to 3-5
seconds and nothing else. Other regulators do not help. What could have
gone wrong, any ideas?
It turns completely off, the screen goes black and power led turns off
and this little noise inside of it (you now, all CRTs have that noise)
turns off too. When I disconnect it from the power and count to at
least 5 then turn on, it works again for 4 seconds.
I have an experience with repairing radios and cassette recorders but I
am a bit afraid of monitors (because of a high voltage) although I could
replace any component if only I knew which one is faulty.
Thanks (at least for reading this nightmare).
--
midix
.
- Follow-Ups:
- Prev by Date: Nakamichi CR-1: Service Manual/ plan needed
- Next by Date: Re: mike chassis socket question
- Previous by thread: Nakamichi CR-1: Service Manual/ plan needed
- Next by thread: Re: Old monitor turns itself off even when disconected - help!
- Index(es):
Relevant Pages
|
