bush ws6674 widescreen tv

i have a bush widescreen tv ws6674 with what appears to be chassis 99ta052g

power supply was trying to come on and on removal of the shorted HOT the
power supply came up fine

the pins on the horizontal output to the yoke connecter were burned with
virtually no solder on them at all

i measured the resistance of the yoke windings and the horizontal is 1R6 and
the vertical is 5R8 - according to an old post the horizontal windings are a
bit low resistance but could this be because its a widescreen tv and needs
more power to achieve the extra deflection?

i have ordered a new HOT which ill get on friday and i am going on the
assumption that the poor solder on the horizontal connector caused arcing
that blew the hot.

the old post mentioned seperating the windings of the yoke and comparing
them but i cannot work out how they are wired because there seems to be some
kind of choke/transformer between the windings confusing matters on a small
pcb mounted on the yoke ( i would post a picture but i cant find my digital
camera - sorry)

this is my first widescreen tv and i would appreciate any help on the
subject - especially whether you think the yoke resistances are about right

cheers

neilish

remove nospam to email me


.

Relevant Pages

  • Re: bush ws6674 widescreen tv
    ... i measured the resistance of the yoke windings and the horizontal is 1R6 ... and the vertical is 5R8 - according to an old post the horizontal windings ... assumption that the poor solder on the horizontal connector caused arcing ...
    (sci.electronics.repair)
  • Re: Yoke Replacement
    ... > 9" color TV/radio combo I picked up in the trash, had a badly burned yoke. ... > was able to isolate and insulate the shorted windings, ... > magnet wire that I could do this with. ... More the the impedance is the inductance. ...
    (sci.electronics.repair)
  • Re: DIY Amplifone Yoke
    ... The yoke certainly does look very regular, identical in shape to a G07 ... windings on X, ... Since the G08 uses a 100 degree tube, the deflection board has to work ...
    (rec.games.video.arcade.collecting)
  • FIXED! Samsung projector tv, how I locate a bad yoke?
    ... That was lucky one, the green yoke horizontal (pair of windings, the ... one halve of horizontal windings went partially toast-burned style ... that is very lucky that owner didn't have to pay for a CRT! ...
    (sci.electronics.repair)
  • Re: Is there any reason no one can reproduce Ampliphone Vector Monitor Boards
    ... the impeadence differences are very small when comparing horozontal ... yoke here measuring 80 ohms, in comparison to the g08 yoke measuring ... about 1 ohm. ... windings were around 1ohm and 1.5mH. ...
    (rec.games.video.arcade.collecting)