Re: SONY AE1C intermittant green-color HELP

Anything from cracked solder connections to corroded crt pins may cause this
problem. Switch the drive signals from the main to the crt panel by swapping
a few wires, (solder-unsolder, etc), red/green or blue/green and see if
symptom follows the green drive or in possibly on the crt board or in the
crt. Active or passive components from the jungle ic to the crt may be the
cause. Good Luck.
"Boba" <bobha28@xxxxxxxxx> wrote in message
news:1146399330.808262.284920@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Try www.fixya.com they they are very good with TV's.

Good Luck



.

Relevant Pages

  • 25" GE tv model:25GT522JX2,chassis:CTC177AF3
    ... was not the crt I swaped the red and green wires on the crt board and ... drive signals going back to the green ouput pin of ... but I have never tried the first technique (that I commonly use on ... Note:the customer won this tv in a raffle/lottery draw at the Halifax ...
    (sci.electronics.repair)
  • Re: SONY AE1C intermittant green-color HELP
    ... Switch the drive signals from the main to the crt panel by ... Hmm, but I checked the voltages of all colors and they seemed to be okay, ... I have now acquired the appropriate schematics for AE1C, ...
    (sci.electronics.repair)
  • Re: Hyperterminal
    ... Use CRT, Hyperterminal is problematic: ... Good luck, ... George McCollister ... > I am having a problem with Hyperterminal not showing me all the ...
    (microsoft.public.windowsce.app.development)
  • tangent streak trifocals/bifocals
    ... 20" CRT... ... Seems that if I look at a spot or word of text anything outside of about a 4" diameter circle is sort of "peripheral" to what you are looking at and you can't really tell if it's in focus or not. ... Good luck with them. ... probably a pioneer in this area. ...
    (sci.med.vision)