Re: More info....



On Thu, 18 May 2006 09:49:26 -0500, BigMike <bigmikey@xxxxxxxxxx> put
finger to keyboard and composed:

I wanted to add that the picture blooms very badly when the screen control
is opened up even slightly. The CRT appears to be fine when the screen
control is set turned completely down. It doesn't appear to be a shorted
CRT, although anything is possible.

I'm not familiar with your set, but high voltage regulation problems
are often caused by tripler faults. In your case the tripler is
probably internal to the FBT so there's not much you can do. Check the
B+ first, though.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
.



Relevant Pages

  • Re: Meaning of Brightness for TFT monitors
    ... A CRT has much greater control (especially if you're prepared ... Basically an LCD brightness control is most similar ... the CRT contrast is effectively scaling the input ...
    (sci.engr.color)
  • Re: Amplifone 25" blooming?
    ... Dim and Fuzzy CRT display is usually caused by poor electron beam ... If adjusting the focus control has a SLIGHT effect, ... and each section of the grid should have DIFFERENT DC ...
    (rec.games.video.arcade.collecting)
  • Re: A reboot user
    ... >>Is there a CRT, Keyboard and Mouse on the box? ... >>If so you can have reboot and shutdown click to do it buttons on the ...
    (Fedora)
  • Re: Fanuc 0M error code(s) on an old CNC drill mill
    ... And the OVERLOAD and SEQUENCE ERROR alarm LEDs are lit. ... The CRT is only showing "Not Ready" and no alarms as far as you've told ... not control related. ...
    (alt.machines.cnc)
  • Re: Acramatic 950 keyboards
    ... Same goes for CRT. ... Maybe they have a plug for a PS2 type ... Siemens to sell me just the keyboard, ...
    (alt.machines.cnc)