Re: PSU motherboard connector



Pooh Bear wrote:

lsmartino wrote:

Michael Black ha escrito:

If you have a connector that is fairly standard, and you change the
pinout, you risk getting in trouble when someone connects up that
power supply to their motherboard assuming that common connector is
indeed using the common pinout.
Well, Dell computers in the Pentium 3 era used a dedicated PSU with a
conventional ATX connector but the pin assignment was different from
the standard. They made an arrangement with Intel to get motherboards
using that non standard ATX connector.

Really ? Good Lord ! That's *insane*

Graham


It 'is' true. It was pretty a pretty hot topic at the time on motherboard ng's.

Why did they do it?

Should be obvious: they wanted a captive customer base for replacements. In this case, the poor semi-informed dude who thought he only needed a replacement supply soon found out he also needed a new motherboard...and both had to be purchased exclusively from Dell.

jak

.



Relevant Pages

  • Re: PSU motherboard connector
    ... power supply to their motherboard assuming that common connector is ... indeed using the common pinout. ... conventional ATX connector but the pin assignment was different from ...
    (sci.electronics.repair)
  • Re: salvaged computer power supply
    ... the power supply on without the motherboard. ... green, blue, violet, grey and white wires. ... Either the pinout on the connector is standard, ...
    (sci.electronics.repair)
  • Re: Need HD connector pinout for Toshiba T4900CT
    ... >>Need HD connector pinout for Toshiba T4900CT ... Please explain "normal" It's a tiny 50-pin surface mount connector. ... the Hard Disk connector on the ... Need the connector pinout for the motherboard connector. ...
    (sci.electronics.repair)
  • Need HD connector pinout for Toshiba T4900CT
    ... Need HD connector pinout for Toshiba T4900CT ... I did junk a 4600 that has the same connectors. ... Wanted, Slot 1 Motherboard ...
    (sci.electronics.repair)
  • DOCS for BUGG-POWER external power supply IIGS/IIe/II+
    ... Univ. of New Mexico-Gallup IBM POWER SUPPLY IIGS INSTALLATION PROCEDURE ... Molex-7 connector on the motherboard. ... voltages will normally be lower than the target values. ...
    (comp.sys.apple2)